Vật liệu trám bít ống tủy Endocem MTA Maruchi

Vật liệu trám bít ống tủy Endocem MTA Maruchi
Vật liệu trám bít ống tủy Endocem MTA Maruchi
Mua SỈ, SỐ LƯỢNG LỚN liên hệ Zalo (tìm hiểu thêm)
(Click copy SDT)
Vật liệu trám bít ống tủy Endocem MTA Maruchi - Ống 300mg
Đã bán 9 (Đang xem 1)
  • 100% CHÍNH HÃNG

  • Phản hồi CHAT ngay lập tức

  • 7 ngày đổi trả nếu sản phẩm lỗi

  • Mở hộp kiểm tra khi nhận hàng

Đăng nhập để xem giá
Hỗ trợ ship cho đơn hàng từ 1.000.000₫
Freeship 20K đơn đơn từ 1 triệu
Freeship 30K đơn từ 3 Triệu
Freeship 50K đơn từ 5 Triệu
Sản phẩm hiện Cháy Hàng, đã có 58+ khách hàng chuyển sang các sản phẩm dưới đây:
;

VẬT LIỆU TRÁM BÍT ỐNG TỦY ENDOCEM MTA MARUCHI

✅ Xuất xứ: Maruchi (Hàn Quốc)
✅ Sản phẩm: HÀNG CHÍNH HÃNG
✅ Freeship: TOÀN QUỐC
✅ Quy cách: Ống 300mg

ENDOCEM MTA is a revolutionary next generation MTA product based on the science of pozzolan reactions. featuring quick setting times, easy handling with consistent outcomes, excellent sealing capabilities and outstanding biocompatibility. ENDOCEM MTA exhibits high efficacy not only in apical retro-filling and root perforations but also in vital pulp therapies such as direct pulp capping.


Fast setting time · Adequate consistency

ENDOCEM MTA is non-miscible with liquid components, including blood, and thus is ideal for use in clinical situations where bleeding is difficult to control.
It has a fast setting time that allows for resin bonding to occur immediately after setting.


Mechanical property

ENDOCEM MTA maintains its integrity in less than ideal clinical situations, including contamination with blood or saliva and presence of inflammation or infection.
It is compatible with any type of bonding agents.


Dentin bonding strength (push-out bond strength) by MTA types

Anterior teeth were vertically sectioned along the long axis, and 2 mm thick dentin slices made. A perforation 1.5 mm in depth was drilled in the root canal, and filled with MTA (mixed in accordance with manufacturer’s guidelines). Wet cotton was placed on top, and left for 1, 3, and 7 days. Push-out bond strength of MTA against dentin was measured with 1 mm/min crosshead speed. (n=10)
Please see test results above.



Shear bond strength between MTA and various resin bonding agents

A perforation 4 mm in diameter and 2 mm deep was drilled in a cylindrical block, and filled with MTA (mixed in accordance with manufacturer’s guidelines). It was left to harden for 1 week under conditions of 98oF at 100% humidity. At this point flowable resins representing 4th, 5th, 6th and 7th generations were bonded to the block and shear bond strength measured. (n=10)
Please see test results above.

ENDOCEM MTA is seen as reaching a lower level of strength than ProRoot MTA initially. However, the bond strength increases over time.

Unlike conventional MTAs that exhibit bonding strength changes dependent on external factors such as saliva, blood, or inflammation, ENDOCEM MTA exhibits a consistent level of bond strength regardless of external factors.

ENDOCEM MTA exhibits consistent shear bond strength across all bonding agent types. This is further proof that ENDOCEM MTA is compatible with all bonding agents, and not adversely affected by specific characteristics of certain bonding agents.


Super sealing property

This is an example of stable clinical outcomes in presence of severe inflammation with minimization of dead space resulting from pozzolan reaction.

This is an example of stable clinical outcomes in presence of severe inflammation with minimization of dead space resulting from pozzolan reaction.

After MTA was mixed in accordance with manufacturer’s guidelines, it was applied in a 5 mm X 2 mm Teflon tube, and then immediately immersed in FBS. After 24 hours it was taken out, washed, and observed under SEM.
(a)ENDOCEM MTA(b)ProRoot MTA(c)IRM

When (b) Proroot MTA is used for the same protocol the FBS infiltrated part was found to have been washed away during the setting process. When (c) IRM is used for the same protocol resistance to wash-out is comparable to that of (a) ENDOCEM MTA. However, many adjacent gaps are observed, and this is indicative of weaknesses where liquids, including water or blood, could possibly invade.

When exposed to liquids, i.e. saliva or GCF, the seal may be compromised over time due to degradation. Therefore, adding a resin base will be necessary before final restoration in direct pulp capping.


Least discoloration

ENDOCEM MTA allows teeth to maintain natural esthetics as it does not cause discoloration.

Picture view after tooth was filled with MTA and restored in artificial saliva.

Unlike (b) Proroot MTA or (c) Angelus MTA, (a) ENDOCEM MTA does not cause discoloration of adjacent tooth.

This is possible through the pozzolan reaction’s blockage of dentinal tubules. However, it should be noted that if leakage occurs in the final restoration, ENDOCEM MTA itself could undergo corrosion and that process may lead to discoloration.


Antibacterial effect

ENDOCEM MTA has antimicrobial effects, not only on S. Mutans but also on E. Faecalis.

Enterococcus Faecalis is a pathogenic bacterium found with highest frequency in roots of endodontic failures, and is resistant against most MTA.
ENDOCEM MTA possesses strong anti-bacterial properties against E.Faecalis.


Excellent biocompatibility

Our patented manufacturing techniques guarantee ENDOCEM MTA’s excellent biocompatibility.

SEM observation (x1000) of MG63 cells incubated for 72 hrs on (a)ENDOCEM MTA, (b)ProRoot MTA, (c)IRM

Our patented manufacturing techniques guarantee ENDOCEM MTA’s excellent biocompatibility.

SẢN PHẨM THƯỜNG ĐƯỢC XEM CÙNG
Đánh giá nha sĩ (chưa có đánh giá)
Hãy chia sẻ nhận xét của quý khách về sản phẩm là nguồn chia sẻ thông tin thiết thực đến cộng đồng bác sĩ nha khoa
Thêm hình sản phẩm nếu có (tối đa 5 hình)
Vật liệu trám bít ống tủy Endocem MTA Maruchi

Vật liệu trám bít ống tủy Endocem MTA Maruchi

Rating:
100%
(0 đánh giá)
Thương hiệu:

Maruchi (Hàn Quốc)

Hãy chia sẻ nhận xét của quý khách về sản phẩm là nguồn chia sẻ thông tin thiết thực đến cộng đồng bác sĩ nha khoa

Quý khách có thắc mắc về sản phẩm hoặc dịch vụ của Sannhakhoa.vn? Quý khách đang muốn khiếu nại hay phản hồi về đơn hàng đã mua?

Hỏi đáp (chưa có hỏi đáp)

Các câu hỏi về sản phẩm

  • - Chế độ bảo hành và phương thức vận chuyển?
  • - Sản phẩm này dùng thế nào?

Các câu hỏi liên quan đến sản phẩm hư hỏng, cần đổi trả, v.v ... vui lòng gởi email về info@sannhakhoa.vn

GIỎ HÀNG (0 sản phẩm)

Tổng tiền:

sản phẩm: 0